Floatair Boatlifts
Best boatlift in the industry - Captain Ted, Host of Pleasure Boater - The Outdoor Channel
(864) 467-1806 • 
Which lift is right for me?

4 Corner Boat Lifts

  • 4 Corner Boat Lifts

  • Attaches to dock frame with multiple galvanized steel brackets
  • Can accommodate bow first or stern first docking
  • High Density Nylon Low Friction bearings create quiet, strong, and smooth operation
  • Offers all-weather protection for your boat
  • Reinforces dock strength and stability
  • Virtually maintenance free
  • Solid steel frames which are hot dipped galvanized to fight weathering
  • 3 inch slide tubes for increased strength and durability
  • Dual pitman arms for stability and security
  • A permanent ring of air around the frame which takes pressure off your dock when the boatlift is in the down position.
  • Unique safety features to insure the health of loved ones and your boat.

Model: Capacity: Min. Water Required (in inches) Min-Max. Slip Width Frame Dimensions
2500# 4C Lift 2500# 54" 4.5 ft. 9'9" 14' 10'
4000# 4C Lift 4000# 54" 4.5' ft. 9'9" 14' 10' or 15'
5000# 4C Lift 5000# 60" 5' ft. 9'9" 14' 10' or 15'
6000# 4C Lift 6000# 54" 4.5' ft. 9'9" 14' 15'
7000# 4C Lift 7000# 60" 5' ft. 9'9" 14' 15'
10,000# 4C Lift 10,000# 66" 5.5' ft. 10' 14' 15'
12,500# 4C Lift 12,5000# 66" 5.5' ft. 10' 14' 20'
15,000# 4C Lift 15,000# 66" 5.5' ft. 10' 14' 20'

*Certain boats, such as wakeboarding boats, may require additional water depth for proper lift operation.

*10' Four Corner minimum slip width for pontoon/tritoon

Our 4 corner boatlift will lift and dock virtually any boat or PWC from 800lbs through 15,000lbs in a u-shaped free floating slip. By using the latest technology, the four corner boatlift protects your boat's hull while it strengthens your dock. The benefits of the four corner boatlift include easy operation, little or no maintenance, and the option of reversing your boat into the slip. This is why Floatair Boatlifts is the boatlift dock builders recommend and engineers buy.

  • Roto-molded polymer tanks which are 1/4 an inch thick and have a half life of 1,000 years and comes with a lifetime warranty.
  • Nylon bushings with 4 1/2" by 1/4" galvanized steel rings for smoother action going up and down
  • Special recycled polymer cradles that never rot or mildew and are skid resistant, waterproof, and will never crack, chip, or splinter. The cradles will never leave a mark on your boats hull and are 100% maintenance free; you will never have to replace them.
                    
  Print Page